XCalibur1832

NXP (formerly Freescale) 12-Core T4240 Processor-Based Conduction- or Air-Cooled 6U VME SBC with Three Gigabit Ethernet Ports

The XCalibur1832 is a high-performance, 6U VME, multiprocessing, single board computer supporting NXP (formerly Freescale) QorIQ T4 processors.

With 12 dual-threaded Power Architecture® e6500 cores running at up to 1.8 GHz, the T4240 delivers enhanced performance and efficiency for today's embedded computing applications.

Not Recommended for New Designs (NRND)

Please contact X-ES Sales for assistance with choosing a recommended replacement product.

Learn more about this product below »
SKU: 90050470 Category:
XCalibur1832 6U VME SBC

The XCalibur1832 is a high-performance, 6U VME, multiprocessing, single board computer supporting NXP (formerly Freescale) QorIQ T4 processors. With 12 dual-threaded Power Architecture® e6500 cores running at up to 1.8 GHz, the T4240 delivers enhanced performance and efficiency for today’s embedded computing applications.

The T4240 processor brings the raw power of 12 dual-threaded e6500 cores running at up to 1.8 GHz with three-channel DDR3 memory and one high-performance 128-bit AltiVec unit per core, delivering unparalleled multi-core performance. For applications which are more power conscious, the T4160 processor offers eight dual-threaded e6500 cores and the T4080 processor offers four dual-threaded e6500 cores, both running at up to 1.8 GHz with two-channel DDR3 memory and all within a significantly reduced power envelope.

The XCalibur1832 is a powerful, feature-rich solution for the next generation of compute-intensive embedded applications. Wind River VxWorks, Linux, and Green Hills INTEGRITY Board Support Packages (BSPs) are available.

Features

  • NXP T4240 processor with 12 dual-threaded Power Architecture® e6500 cores at up to 1.8 GHz
  • Alternate NXP QorIQ processors available: T4160 and T4080
  • 6U VME module
  • Conduction or air cooling
  • Up to 24 GB of up to DDR3-2133 ECC SDRAM in three channels
  • Up to 256 MB of NOR flash (with redundancy)
  • Up to 32 GB of CPU NAND flash
  • Up to three Gigabit Ethernet ports
  • Two USB 2.0 ports
  • Two RS-232/422/485 serial ports
  • One x4 PCI Express port to P0
  • One XMC interface
  • Two PrPMC interfaces
  • Wind River VxWorks BSP
  • Linux BSP
  • Green Hills INTEGRITY BSP
  • QNX Neutrino (contact factory)
  • LynuxWorks LynxOS (contact factory)

Technical Specs

Processor

  • NXP (formerly Freescale) QorIQ T4240 processor
  • 12 dual-threaded Power Architecture® e6500 cores at up to 1.8 GHz
  • 2 MB L2 cache per quad
  • 512 kB platform cache per channel (3)
  • IEEE 754 Floating-Point Unit (FPU) support
  • 128-bit AltiVec engine per core
  • Secure Boot capable

Alternate Processor Configurations

  • T4080 processor with four dual-threaded Power Architecture® e6500 dual cores up to 1.8 GHz
  • T4160 processor with eight dual-threaded Power Architecture® e6500 cores up to 1.8 GHz

Memory

  • Up to 24 GB of up to DDR3-2133 ECC SDRAM in three channels
  • Up to 256 MB of NOR flash (with redundancy)
  • Up to 32 GB of CPU NAND flash

IPMI (Optional)

  • Onboard management controller

VME

  • VME64 (VITA 1-1994 R2002)
  • VME64x (VITA 1.1-1997 R2003)
  • 2eSST (VITA 1.5-2003)
  • Ethernet on VME64x (VITA 31.1-2003)
  • P14 PMC I/O on VME P2 per (VITA 35-2000, P4V2-64ac)
  • P24 PMC I/O on VME P2 per (VITA 35-2000, P4V2-46dz)

Front Panel I/O (Optional)

  • Two RS-232 serial ports
  • One Gigabit Ethernet port
  • One USB 2.0 port
  • General-purpose LEDs
  • Two 10GBASE-T to front panel using I/O mezzanine card

Back Panel

  • Two RS-232/422/485 serial ports
  • Two Gigabit Ethernet ports
  • PMC I/O
  • Two USB 2.0 ports
  • One x4 PCI Express interface
  • Ten discrete GPIO

PrPMC

  • PCI-X (64/32-bit, 100/66 MHz)
  • PCI (64/32-bit, 66/33 MHz)

Software Support

  • Wind River VxWorks BSP
  • Linux BSP
  • Green Hills INTEGRITY BSP
  • Contact factory for availability of QNX Neutrino and LynuxWorks LynxOS (contact factory)

Environmental Requirements

Contact factory for appropriate board configuration based on environmental requirements.

  • Supported ruggedization levels (see the X-ES Ruggedization Chart): 1, 3, 5
  • Conformal coating available as an ordering option

Power Requirements

  • Power will vary based on configuration and usage. Please consult factory.

Accessories

Documentation

Datasheet

To view all of the information about this product in a PDF, please download the datasheet.

Download Datasheet

Technical Documents

SupportNet is your source for product manuals, technical support, and software downloads.

Access SupportNet

Block Diagram

XCalibur1832 6U VME SBC
XCalibur1832 — 6U VME Single Board Computer

Information Request

Additional Information

VME Bridge

XCalibur1832 features a Xilinx Artix-7-based VME Bridge

View More

Product Brief

NXP QorIQ T-Series
Product Brief

View Brief

Datasheet

View the XCalibur1832
Datasheet PDF

Download Datasheet

6U VME SBCs

View the full selection of 6U VME SBCs from X-ES

View All
Back to Top
Fast, Flexible, and Customer-Focused Embedded Solutions
© 2024 Extreme Engineering Solutions, Inc