The XPedite7170 is a high-performance, low-power 3U VPX-REDI single board computer based on the Intel® Core™2 Duo processor. With two x4 PCI Express P1 interconnects and up to two Gigabit Ethernet ports, the XPedite7170 is ideal for high-bandwidth data-processing applications.
The XPedite7170 accommodates up to 4 GB of DDR2-400 ECC SDRAM to support memory-intensive applications, and hosts numerous I/O ports including Gigabit Ethernet, USB 2.0, SATA, and RS-232/422/485 through the P2 backplane connector.
The XPedite7170 can be used in either the system slot or peripheral slot of a VPX backplane. Linux 2.6, Wind River VxWorks, QNX Neutrino, and Green Hills INTEGRITY Board Support Packages (BSPs), as well as Microsoft Windows drivers, are available for the XPedite7170.
Technical Specs
Processor
- Intel® Core™2 Duo at up to 1.8 GHz
- Up to 200 MHz (800 MT/s) FSB
- Up to 6 MB of L2 cache
Memory
- Up to 4 GB of DDR2-400 ECC SDRAM
- Up to 2 MB firmware hub flash (or 1 MB with redundancy)
- 4 GB of NAND flash
Front Panel I/O
- Front panel RJ-45 Ethernet, USB, and micro-DB-9 RS-232 serial ports available via optional plugover module
VPX (VITA 46) P1 I/O
- x4 PCI Express interface to P1.A
- x4 PCI Express interface to P1.B
- One Gigabit Ethernet port
- X12d XMC P16 I/O
VPX (VITA 46) P2 I/O
- One Gigabit Ethernet port
- Two SATA ports capable of 1.5 Gb/s (optional)
- Two USB 2.0 ports (optional)
- Up to two RS-232/422/485 serial ports
- I²C port
- 3.3 V GPIO signals
- P64s PMC P14 I/O
XMC/PrPMC Site
- 32-bit, 33 MHz PCI bus (PMC interface)
- x4 PCIe port (XMC interface)
- P64s P14 I/O support
- X12d P16 I/O support
Software
- Linux BSP
- Wind River VxWorks BSP
- QNX Neutrino BSP
- Green Hills INTEGRITY BSP
- Microsoft Windows drivers
Physical Characteristics
- 3U VPX-REDI conduction- or air-cooled form factor
- Dimensions: 100 mm x 160 mm
- 0.8 in. pitch without solder-side cover
- 0.85 and 1.0 in. pitch with solder-side cover
Environmental Requirements
Contact factory for appropriate board configuration based on environmental requirements.
- Supported ruggedization levels (see the X-ES Ruggedization Chart): 1, 3, 5
- Conformal coating available as an ordering option
Power Requirements
- Maximum power consumption: 37 W (with 1.8 GHz processor), 28 W (with 1.2 GHz processor)
Documentation
Datasheet
To view all of the information about this product in a PDF, please download the datasheet.
Download Datasheet
Technical Documents
SupportNet is your source for product manuals, technical support, and software downloads.
Access SupportNet
