XChange3010

3U VPX-REDI Conduction- or Air-Cooled PCI Express Switch with Bridging to cPCI on a 3U VPX Module

The XChange3010 is a conduction- or air-cooled 3U VPX-REDI module that provides a means of bridging from a serial PCI Express VPX fabric and parallel 32-bit PCI bus. This allows a system designer to migrate to VPX processor cards or other modern VPX devices without forcing the redesign of existing CompactPCI peripheral cards.

End of Life (EOL)

Please contact X-ES Sales for assistance with choosing a recommended replacement product.

Learn more about this product below »
REQUEST A QUOTE ASK A QUESTION

Contact us directly at +1 (608) 833-1155

SKU: 90030045 Category:
XChange3010 3U VPX Ethernet Switch

The XChange3010 is a conduction- or air-cooled 3U VPX-REDI module that provides a means of bridging from a serial PCI Express VPX fabric and parallel 32-bit PCI bus. This allows a system designer to migrate to VPX processor cards or other modern VPX devices without forcing the redesign of existing CompactPCI peripheral cards.

The PCI Express switch may be configured so that any one of the four VPX ports, the XMC site, or the PCI bus is the root complex.

Features

  • 3U VPX switch
  • Ruggedized Enhanced Design Implementation (REDI)
  • Conduction or air cooling
  • Four VPX x4 PCI Express interfaces
  • Supports three cPCI peripheral cards when used with the XTend4010
  • Supports four cPCI peripheral cards if appropriate backplane is used and no PrPMC is placed
  • Any XMC/PrPMC card may be used as a system controller
  • Supports 5 V/3.3 V PCI VIO power

Technical Specs

VPX

  • Provides the switch for a star PCI Express fabric

cPCI

  • Supports three CompactPCI peripheral slots when used on the XTend4010
  • Supports four CompactPCI peripheral slots if no PrPMC is placed and is used with the appropriate backplane
  • 32-bit wide PCI bus
  • 33/66 MHz frequency operation

Ethernet

  • Two 10/100 Mbps Ethernet lanes may be routed from either the PMC or the XMC site

Serial

  • Serial I/O may be routed to either the PMC or the XMC site

Physical Characteristics

  • 3U cPCI form factor
  • Dimensions: 100 mm x 160 mm, 10 mm stacking height

Environmental Requirements

Contact factory for appropriate board configuration based on environmental requirements.

  • Supported ruggedization levels (see the X-ES Ruggedization Chart): 1, 3, 5
  • Conformal coating available as an ordering option

Power Requirements

  • 3.3 V, 0.6 A, 2 W
  • 5 V, 1.24 A, 6.2 W

Accessories

Please contact X-ES Sales at sales@xes-inc.com or by phone at +1-608-833-1155 for information on this product's accessories.

Documentation

Datasheet

To view all of the information about this product in a PDF, please download the datasheet.

Download Datasheet

Technical Documents

SupportNet is your source for product manuals, technical support, and software downloads.

Access SupportNet

Block Diagram

Additional Information

Datasheet

View the XChange3010
Datasheet PDF

Download Datasheet

3U VPX Switches

View the full selection of 3U VPX Switches from X-ES

View All
Back to Top
Fast, Flexible, and Customer-Focused Embedded Solutions
© 2024 Extreme Engineering Solutions, Inc