XChange3013

3U VPX Gigabit Ethernet Switch with Optional Layer 2 Switching and Layer 3 Routing Management Support

The XChange3013 provides fourteen backplane 10/100/1000BASE-T Ethernet ports and six backplane network 1000BASE-X Ethernet ports. It supports IPv6 and a comprehensive set of IETF RFCs and IEEE protocols.

The XChange3013 can also support compliance to the VICTORY specification as an Infrastructure Switch and Router.

Not Recommended for New Designs (NRND)

Please contact X-ES Sales for assistance with choosing a recommended replacement product.

Learn more about this product below »
SKU: 90030320 Category:
XChange3013 3U VPX Ethernet Switch

The XChange3013 is a conduction- or air-cooled, 3U VPX Ethernet switch module. The XChange3013 provides fourteen backplane 10/100/1000BASE-T Ethernet ports and six backplane network 1000BASE-X Ethernet ports.

The XChange3013 delivers full wire-speed across all of its ports and supports jumbo packets up to 12 kB. It also supports IPv6 and a comprehensive set of IETF RFCs and IEEE protocols. The XChange3013 can also support compliance to the VICTORY specification as an Infrastructure Switch and Router.

When configured as a fully managed Layer 2 switch, support for features such as fast boot, flow control, MAC bridging (IEEE 802.1D), port mirroring, port authentication (IEEE 802.1x), VLANs (IEEE 802.1Q), Quality of Service (QoS), GVRP, MVRP, port and protocol classification (IEEE 802.1v), GARP, MRP, GMRP, MMRP, LACP, RMON, STP, RSTP, MSTP, RPVST+, AgentX, and IGMP are included.

When configured as a Layer 3 router, support for Multicast and Unicast Routing features such as DVMRP, IGMP, PIM-DM, PIM-SM, PIM-SSM, MLD, RIP, BGP, OSPFv2/OSPFv3, and VRRP are added.

When paired with the XPedite5205 XMC router module, the XChange3013 includes Cisco IOS® IP routing and Cisco Mobile Ready Net capabilities. With this technology, the router provides highly secure data, voice, and video communications to stationary and mobile network nodes across both wired and wireless links.

With the XPedite5205, Cisco IOS® security features are also supported, including hardware encryption, firewalls with integrated threat control, zone-based firewalls, Intrusion Prevention System (IPS), content filtering, identity management using Authentication, Authorization, and Accounting (AAA), and Public Key Infrastructure (PKI).

Features

  • Non-blocking, full wire-speed, Ethernet switch
  • Layer 2 Switching and Layer 3 Routing Management with extensive IEEE protocol and IETF RFC support (optional)
  • VICTORY Infrastructure Switch and Router support (optional)
  • Fourteen 10/100/1000BASE-T Gigabit Ethernet ports
  • Six 1000BASE-X SerDes Gigabit Ethernet ports
  • Supports the XPedite5205 Cisco IOS® Embedded Services Router (ESR)
  • Ruggedized Enhanced Design Implementation (REDI) per VITA 48
  • Conduction or air cooling
  • IPv4 and IPv6 support
  • Support for jumbo frames up to 12 kB
  • IEEE 1588v2 and SyncE support (optional)
  • NTP, SSH, SNMP, and DHCP server support (optional)
  • Freescale QorIQ P1010 Management Processor
  • Optional VITA 46.11 Tier 1 and Tier 2 IPMI Controller (IPMC)

Technical Specs

Ethernet

  • Fourteen 10/100/1000BASE-T Ethernet interfaces
  • Six 1000BASE-X SerDes Gigabit Ethernet interfaces
  • IPv4 and IPv6 support
  • Support for jumbo frames up to 12 kB
  • Advanced cable open/short detection
  • Non-blocking, full wire-speed
  • IEEE 1588v2 and SyncE support (optional)

Ethernet Management Features (Optional)

  • Layer 2 switching and Layer 3 routing
  • Extensive IEEE protocol and IETF RFC support
  • Configuration through CLI or SNMP
  • 196 MB packet buffer
  • VICTORY Infrastructure Switch and Router support

Management Controller

  • Freescale QorIQ P1010 Management Processor at up to 800 MHz
  • Up to 2 GB DDR3L-800 ECC SDRAM
  • Up to 8 GB NAND flash
  • Dual-redundant SPI boot flash
  • NTP, SSH, SNMP, and DHCP server support (optional)

XMC

Additional Features

  • Optional VITA 46.11 Tier 1 and Tier 2 IPMI Controller (IPMC)

Physical Characteristics

  • 3U VPX form factor
  • Dimensions: 100 mm x 160 mm
  • 0.8 in. or 1.0 in. pitch
  • Compliant to the VITA 48.2 Type 1, Two-Level Maintenance (2LM) standard (optional)

Environmental Requirements

Contact factory for appropriate board configuration based on environmental requirements.

  • Supported ruggedization levels (see the X-ES Ruggedization Chart): 1, 3, 5
  • Conformal coating available as an ordering option

Power Requirements

  • Power will vary based on configuration and usage. Please consult factory.

Accessories

Documentation

Datasheet

To view all of the information about this product in a PDF, please download the datasheet.

Download Datasheet

Technical Documents

SupportNet is your source for product manuals, technical support, and software downloads.

Access SupportNet

Block Diagram

XChange3013 3U VPX Ethernet Switch
XChange3013 — 3U VPX Ethernet Switch

Information Request

Additional Information

Product Brief

Rugged Networking Solutions Product Brief

View Brief

Datasheet

View the XChange3013
Datasheet PDF

Download Datasheet

3U VPX Switches

View the full selection of 3U VPX Switches from X-ES

View All
Back to Top
Fast, Flexible, and Customer-Focused Embedded Solutions
© 2024 Extreme Engineering Solutions, Inc