News & Events | Extreme Engineering Solutions (X-ES)

X-ES Demonstrates Industry’s Fastest-Booting Intel® Core™ i7-Based SBCs

September 3rd, 2013 — News

Extreme Engineering Solutions, Inc. (X-ES) announces the embedded computer industry’s first products to support Fast Boot with Intel’s Firmware Support Package (FSP). With the integration of Intel’s FSP into its Intel® Core™ i7-based bootloader solutions, X-ES enables the fastest possible boot times for Intel® Core™ i7-based Single Board Computers (SBCs). The newly released FSP from Intel® also…

X-ES Announces NXP (formerly Freescale) QorIQ T4240 or T4160-Based 6U VPX Module

July 10th, 2013 — News

Extreme Engineering Solutions, Inc. (X-ES) introduces the XCalibur1840, a 6U OpenVPX™module featuring the NXP (formerly Freescale) QorIQ T4240 or T4160 communications processor. NXP’s Power Architecture® e6500-based T4240 and T4160 processors combine multiple 1.8 GHz dual-threaded cores, large caches, and high-performance networking capabilities with the next-generation AltiVec single-instruction multiple-data (SIMD) engine to provide high-performance processing for both control…

X-ES Ships Secure 3U VPX Ethernet Switches and Routers

June 20th, 2013 — News

Extreme Engineering Solutions, Inc. (X-ES) introduces the XChange3013 and XChange3018 3U VPX switches and routers. These are secure, non-blocking, high-performance, Gigabit and 10 Gigabit Ethernet networking solutions from X-ES that provide versatile management and routing options, ranging from managed or unmanaged Layer 2 switching to fully featured IP routers with Cisco IOS® and Cisco Mobile Ready Net technology….

X-ES Announces 4th Generation Intel® Core™ i7 Processor-Based VPX, VME, cPCI, XMC, and COM Express SBCs

June 4th, 2013 — News

Extreme Engineering Solutions, Inc. (X-ES) has introduced its 3U VPX, 6U VPX, XMC, 3U CompactPCI, 6U CompactPCI, 6U VME, and COM Express® Single Board Computers (SBCs) based on the 4th generation Intel® Core™ i7-4700EQ processor (formerly codenamed Haswell). Rob Scidmore, CEO of X-ES, emphasizes X-ES’ commitment to being first to market with a wide selection of 4th generation Intel® Core™ i7 processor-based…

X-ES Ships XMC with Versatile Mini PCI Express and mSATA Support

April 16th, 2013 — News

Extreme Engineering Solutions, Inc. (X-ES) has announced the XPort5005, an XMC module that can be quickly configured to support a platform’s specific I/O or storage needs. The XPort5005 allows system integrators to reduce the total cost, complexity, and time to market for supporting the varying I/O and storage requirements of different platforms by enabling rapid…

X-ES Introduces an Intel® Core™ i7 Based Fanless Embedded Box PC

March 27th, 2013 — News

Extreme Engineering Solutions, Inc. (X-ES) has introduced the XPand6103, the industry’s smallest and most rugged Fanless Embedded Box PC utilizing the Intel® Core™ i7 processor. The XPand6103 is a reliable and maintenance-free high-performance computing platform ideally suited for environmentally challenging and space constrained situations. It was specifically designed for rugged yet processing-intensive Industrial PC (IPC), vehicle,…

X-ES Introduces 6U VPX SBC Supporting NXP Eight-Core P4080 and Five Other QorIQ Processors

November 28th, 2012 — News

Extreme Engineering Solutions, Inc. (X-ES) introduces the XCalibur1641, a 6U VPX Single Board Computer (SBC) supporting NXP (formerly Freescale) QorIQ P3041, P4040, P4080, P5010, P5020, and P5040 processors. With support for a wide range of QorIQ processors, the XCalibur1641 is an ideal solution for a variety of conduction- and air-cooled, high-end, military applications. The XCalibur1641 is…

X-ES Introduces Intel® Core™ i7 Processor-Based Small Form Factor System

November 1st, 2012 — News

Extreme Engineering Solutions (X-ES) introduces the XPand6104 Small Form Factor (SFF) system supporting a 3rd generation Intel® Core™ i7 COM Express® module. With commercial connectors, this SFF system can be utilized as an XPedite7450 COM Express® development platform, a deployable SFF system, or a demo platform for applications requiring a high-performance Intel® Core™ i7 processor solution. In…

X-ES Adds 6U VPX Module to Its Line of Intel® Core™ i7 Processor-Based Products

October 25th, 2012 — News

Extreme Engineering Solutions (X-ES) introduces the XCalibur4440, a conduction- or air-cooled 6U VPX Single Board Computer (SBC) supporting 2nd and 3rd generation Intel® Core™i7 processors. With a quad- or dual-core processor, 16 GB of memory, and dual XMC/PMC sites, the XCalibur4440 is an ideal platform for the most demanding military applications. The XCalibur4440 features include: Intel® Core™ i7-2655LE,…

X-ES Shipping World’s Smallest, Highest Performance Rugged COM Express Module

October 10th, 2012 — News

Extreme Engineering Solutions (X-ES) is shipping XPedite5650, a conduction- or air-cooled Mini COM Express® module (55 mm x 84 mm) supporting the NXP (formerly Freescale) QorIQ P2041 quad-core processor. With a quad-core processor, 4 GB of memory, a ruggedized design, and at less than 7.2 square inches, the XPedite5650 can provide the processing subsystem for a wide range of…