The XPedite7475 is a high-performance, low-power, 3U VPX-REDI, single board computer based on the 3rd generation Intel® Core™ i7 processor and Intel® QM67 chipset. It was designed specifically for integration with the XPand4208 mil-flight-qualified 3U OpenVPX™ COTS rugged system.
With two PCI Express Fat Pipe P1 interconnects and three Gigabit Ethernet ports, the XPedite7475 is ideal for the high-bandwidth and processing-intensive demands of today’s military and avionics applications. Floating-Point-intensive applications such as radar, image processing, and signals intelligence will benefit from the performance boost provided by the Intel® Advanced Vector Extensions (Intel® AVX).
The XPedite7475 accommodates up to 8 GB of DDR3 ECC SDRAM in two channels to support memory-intensive applications. The XPedite7475 also hosts numerous I/O ports including Gigabit Ethernet, USB 2.0, SATA, graphics, and multiple serial ports through the backplane connectors.
The XPedite7475 can be used in either the system slot or peripheral slot of a VPX backplane. Wind River VxWorks and Linux Board Support Packages (BSPs) are available, as well as Microsoft Windows drivers.
The XPedite7475 provides Intel® vPro™ technology for remote management. Remote management is accessed via the P2 10/100/1000BASE-T Ethernet port.
Technical Specs
Processor
- Quad- or dual-core Intel® Core™ i7
- Intel® Turbo Boost Technology
- Intel® Hyper-Threading Technology
- AVX instruction set extensions
- Integrated with Intel® QM67 chipset
- Dual-channel integrated memory controller
- Integrated high-performance 3D graphics controller
Quad-Core Processor Configurations
- Core™ i7-3612QE: 2.1 GHz, 6 MB cache
Dual-Core Processor Configurations
- Core™ i7-3555LE: 2.5 GHz, 4 MB cache
- Core™ i7-3517UE: 1.7 GHz, 4 MB cache
Memory
- Up to 8 GB of DDR3 ECC SDRAM in two channels
- 32 MB of NOR boot flash
- Up to 32 GB of NAND flash
- 16 kB EEPROM
Graphics
- Integrated high-performance 3D graphics controller
- One HDMI/DVI-D port
VPX (VITA 46) P0 I/O
VPX (VITA 46) P1 I/O
- x4 PCI Express Fat Pipe interface to P1.A
- x4 PCI Express Fat Pipe interface to P1.B
- Two 1000BASE-BX Gigabit Ethernet ports
- Four SATA ports capable of 3 Gb/s
- DVI graphics
VPX (VITA 46) P2 I/O
- One 10/100/1000BASE-T Gigabit Ethernet port with Intel® vPro™ support
- Four USB 2.0 ports
- Eight LVTTL serial ports
- XMC P16 I/O
- Eight GPIO
XMC Site
- x8 PCI Express port
- One SATA port
Software Support
- Wind River VxWorks BSP
- Linux BSP
- Microsoft Windows drivers
- Contact factory for availability of Green Hills INTEGRITY, QNX Neutrino, and LynuxWorks LynxOS BSPs
Physical Characteristics
- 3U VPX-REDI conduction-cooled form factor
- Dimensions: 100 mm x 160 mm
- 0.8 in. pitch without solder-side cover
- 0.85 in. and 1.0 in. pitch with solder-side cover
Environmental Requirements
Contact factory for appropriate board configuration based on environmental requirements.
Power Requirements
- Power will vary based on configuration and usage. Please consult factory.
Documentation
Datasheet
To view all of the information about this product in a PDF, please download the datasheet.
Download Datasheet
Technical Documents
SupportNet is your source for product manuals, technical support, and software downloads.
Access SupportNet
