XPedite5570

NXP (formerly Freescale) QorIQ P2020 Dual-Core Processor-Based Conduction- or Air-Cooled 3U VPX-REDI Single Board Computer

The XPedite5570 supports up to 8 GB of up to DDR3-800 ECC SDRAM, as well as up to 32 GB of NAND flash and up to 512 MB of NOR flash (with redundancy). It also supports dual Gigabit Ethernet, GPIO, I²C, XMC I/O, PMC I/O, USB, and up to two RS-232/422/485 serial ports through the P2 connector.

End of Life (EOL)

Please contact X-ES Sales for assistance with choosing a recommended replacement product.

Learn more about this product below »
REQUEST A QUOTE ASK A QUESTION

Contact us directly at +1 (608) 833-1155

SKU: 90030200 Category:
XPedite5570 3U VPX-REDI SBC

The XPedite5570 is a high-performance, 3U VPX, single board computer supporting NXP (formerly Freescale) QorIQ P1 and P2 processors. With dual Power Architecture® e500v2 cores running at up to 1.2 GHz, the P2020 delivers enhanced performance and efficiency for today’s embedded computing applications.

The XPedite5570 supports up to 8 GB of up to DDR3-800 ECC SDRAM, as well as up to 32 GB of NAND flash and up to 512 MB of NOR flash (with redundancy). The XPedite5570 provides two PCI Express interconnects, as well as two SerDes Gigabit Ethernet P1 fabric interconnects. The XPedite5570 also supports dual Gigabit Ethernet, GPIO, I²C, PMC I/O, XMC I/O, USB 2.0, and up to two RS-232/422/485 serial ports through the P2 connector.

The XPedite5570 provides a ruggedized, high-performance, feature-rich solution to support the next generation of rugged embedded applications. Linux, Wind River VxWorks, QNX Neutrino, and Green Hills INTEGRITY-178 Board Support Packages (BSPs) are available.

Features

  • NXP QorIQ P2020 processor with dual Power Architecture® e500v2 cores at up to 1.2 GHz
  • Alternate NXP QorIQ processors: P1011, P1020, P2010
  • 3U VPX (VITA 46) module
  • Ruggedized Enhanced Design Implementation (REDI)
  • Conduction or air cooling
  • Up to 8 GB of DDR3-800 ECC SDRAM
  • Up to 512 MB of NOR flash (with redundancy)
  • Up to 32 GB of NAND flash
  • XMC/PrPMC interface
  • x4 PCI Express P1.A fabric interconnect
  • x4 PCI Express P1.B fabric interconnect
  • Two SerDes Gigabit Ethernet P1 fabric interconnects
  • Two 10/100/1000BASE-T Ethernet ports (optional)
  • Up to two RS-232/422/485 serial ports to P2
  • One USB 2.0 port to P2
  • Front I/O available via plugover module
  • Linux BSP
  • Wind River VxWorks BSP
  • QNX Neutrino BSP
  • Green Hills INTEGRITY-178 BSP

Technical Specs

Processor

  • NXP (formerly Freescale) QorIQ P2020 processor
  • Dual Power Architecture® e500v2 cores at up to 1.2 GHz
  • 512 kB of shared L2 cache

Alternate Processor Configuration

  • P1011 processor with one Power Architecture® e500v2 core at up to 800 MHz
  • P1020 processor with two Power Architecture® e500v2 cores at up to 800 MHz
  • P2010 processor with one Power Architecture® e500v2 core at up to 1.2 GHz

Memory

  • Up to 8 GB of DDR3-800 ECC SDRAM
  • Up to 512 MB of NOR flash (with redundancy)
  • Up to 32 GB of NAND flash

VPX (VITA 46) P1 I/O

  • x4 PCI Express to P1.A
  • x4 PCI Express to P1.B
  • Two SerDes Gigabit Ethernet ports (or one 10/100/1000BASE-T port out P1 and one 10/100/1000BASE-T port out P2)
  • X12d XMC P16 I/O

VPX (VITA 46) P2 I/O

  • One 10/100/1000BASE-T Ethernet port (when two SerDes Gigabit Ethernet P1 ports are not used)
  • Up to two RS-232/422/485 serial ports
  • I²C port
  • 3.3 V GPIO signals
  • P64s PMC P14 I/O
  • One USB 2.0 port

XMC/PrPMC Site

  • 32-bit, 66 MHz PCI bus (PMC interface)
  • x4 PCIe port (XMC interface)
  • P64s P14 I/O support
  • X12d P16 I/O support

Front Panel I/O

  • Dual RJ-45 Ethernet, micro-DB-9 RS-232 serial port, and USB 2.0 port available via optional plugover module

Software Support

  • Linux BSP
  • Wind River VxWorks BSP
  • QNX Neutrino BSP
  • Green Hills INTEGRITY-178 BSP

Physical Characteristics

  • 3U VPX-REDI conduction- or air-cooled form factor
  • Dimensions: 100 mm x 160 mm
  • 0.8 in. pitch without solder side cover
  • 0.85 and 1.0 in. pitch with solder side cover

Environmental Requirements

Contact factory for appropriate board configuration based on environmental requirements.

  • Supported ruggedization levels (see the X-ES Ruggedization Chart): 1, 3, 5
  • Conformal coating available as an ordering option

Power Requirements

  • Power will vary based on configuration and usage. Please consult factory.

Accessories

  • XIt1070 (90060170) - 3U VPX Rear Transition Module with Gigabit Ethernet, SATA, USB, Serial, and DVI
  • XPand1004 (90071810) - Two-Slot 3U VPX Development Platform for Conduction-Cooled Modules with RTM I/O
  • XPand1200 (90070530) - 3U VPX Conduction-Cooled Development Platform
  • XPand1300 (90070415) - 3U VPX Air-Cooled Development Platform
  • XTend200 (90070050) - Debug Module with JTAG/Serial/Ethernet Cable

Documentation

Datasheet

To view all of the information about this product in a PDF, please download the datasheet.

Download Datasheet

Technical Documents

SupportNet is your source for product manuals, technical support, and software downloads.

Access SupportNet

Block Diagram

Additional Information

Product Brief

NXP P-Series SBCs
Product Brief

View Brief

Datasheet

View the XPedite5570
Datasheet PDF

Download Datasheet

3U VPX SBCs

View the full selection of 3U VPX SBCs from X-ES

View All
Back to Top
Fast, Flexible, and Customer-Focused Embedded Solutions
© 2024 Extreme Engineering Solutions, Inc