XIt1088

3U VPX Rear Transition Module with Gigabit Ethernet, eSATA, USB, Serial, and XIM Sites

The XIt1088 provides I/O expansion for the XPedite7674 Intel® Xeon® D 3U VPX Single Board Computer (SBC). Its T-shaped design fits in VITA 46.10 RTM slots and allows for convenient access to more I/O connectors than standard VITA 46.10 RTMs.

Its flexible design allows for easy development with many X-ES 3U VPX products.

Learn more about this product below »
REQUEST A QUOTE ASK A QUESTION

Contact us directly at +1 (608) 833-1155

SKU: 90060430 Categories: ,
XIt1088 3U VPX Rear Transition Module

The XIt1088 provides I/O expansion for the XPedite7674 Intel® Xeon® D 3U VPX Single Board Computer (SBC). Its T-shaped design fits in VITA 46.10 RTM slots and allows for convenient access to more I/O connectors than standard VITA 46.10 RTMs. Its flexible design allows for easy development with many X-ES 3U VPX products.

The XIt1088 supports up to four RS-422/485 ports or six RS-232 ports, one eSATA port, one 10/100/1000BASE-T port, two USB 2.0 ports, four High-Speed Serial ports, 1 PPS input, and access to interrupt inputs.

One XIM site allows support for up to two 10GBASE-T Ethernet ports. One additional XIM site allows for access to the X12d signals from P1.

Features

  • 3U VPX Rear Transition Module
  • One eSATA connector
  • Four micro-DB-9 connectors for dual RS-232/422/485 serial ports
  • Two USB 2.0 connectors
  • One RJ-45 connector to support a 10/100/1000BASE-T Ethernet port
  • One XIM site to support two 10GBASE-T Ethernet ports
  • One XIM site to support X12d breakout
  • Two M.2 connectors for P1.A and P1.B
  • One mini-SAS connector to support four High-Speed Serial ports
  • Headers and toggle switches for GPIO, interrupt, and reset inputs
  • Fits in VITA 46.10 RTM slots
  • 1.0 in. pitch
  • Battery holder to power VBAT

Technical Specs

Back Panel I/O

Third XIM site is for factory use only

  • One RJ-45 connector for 10/100/1000BASE-T Ethernet port
  • Four micro-DB-9 connectors for dual RS-232/422/485 serial ports
  • Two USB 2.0 connectors
  • One eSATA connector
  • 1PPS input SMA connector
  • Four High-Speed Serial ports via mini-SAS connector
  • One XIM site to support X12d breakout
  • One XIM site to support two 10GBASE-T Ethernet ports
  • Two M.2 connectors for P1.A and P1.B

Internal I/O

  • Battery holder
  • GPIO header
  • I²C header

Physical Characteristics

  • 3U VPX RTM form factor
  • Fits in VITA 46.10 RTM slots
  • Overall dimensions: 388 mm x 179 mm. Please contact factory for exact T-shape dimensions by side.
  • 1.0 in. pitch

Environmental Requirements

Contact factory for appropriate board configuration based on environmental requirements.

  • Supported ruggedization levels (see the X-ES Ruggedization Chart): 1
  • Conformal coating available as an ordering option

Accessories

  • XIt3002 (90073180) - XMC I/O Module (XIM) Interconnect with Dual 10GBASE-KR to Dual 10GBASE-T Ethernet
  • XTend300 (90070180) - 1x Female DB-9 to 2x Male DB-9 Serial Port Converter

Documentation

Datasheet

To view all of the information about this product in a PDF, please download the datasheet.

Download Datasheet

Technical Documents

SupportNet is your source for product manuals, technical support, and software downloads.

Access SupportNet

Block Diagram

Additional Information

Datasheet

View the XIt1088
Datasheet PDF

Download Datasheet

3U VPX RTMs

View the full selection of 3U VPX RTMs from X-ES

View All
Back to Top
Fast, Flexible, and Customer-Focused Embedded Solutions
© 2018 Extreme Engineering Solutions, Inc