XPand6211

Rugged Small Form Factor (SFF) COTS 24-Port Gigabit Ethernet Switch, Router with Cisco IOS®, and General-Purpose Processor Module

The XPand6211 is a Commercial-Off-The-Shelf (COTS) Rugged 24-port Gigabit Ethernet switch and router with a compact design that maximizes processing and networking performance while minimizing SWaP. It provides a SWaP-optimized alternative to traditionally larger slot-based systems; it is an actual Small Form Factor (SFF) system based on two COTS XChange3013 3U VPX Gigabit Ethernet switches.

Not Recommended for New Designs

Please contact X-ES Sales for assistance with choosing a recommended replacement product.

Learn more about this product below »
SKU: 90073080 Category:
XPand6211 | Rugged Embedded System
XPand6211 | Rugged Embedded System Front ShotXPand6211 | Rugged Embedded System Back Shot

The XPand6211 is a Commercial-Off-The-Shelf (COTS) Rugged 24-port Gigabit Ethernet switch and router with a compact design that maximizes processing and networking performance while minimizing SWaP. The XPand6211 provides a SWaP-optimized alternative to traditionally larger slot-based systems; it is an actual Small Form Factor (SFF) system based on two COTS XChange3013 3U VPX Gigabit Ethernet switches.

The XChange3013 delivers full wire-speed across all of its ports and supports jumbo packets up to 12 kB. It supports IPv6 and a comprehensive set of IETF RFCs and IEEE protocols. The XPedite5205 Cisco IOS® Router XMC can be installed on the XChange3013 to provide highly secure data, voice, and video communications to stationary and mobile network nodes. The XChange3013 optionally supports compliance with the VICTORY specification as an Infrastructure Switch and Router.

The XPedite8103 provides general-purpose computing with best-in-class performance-per-watt. The E3800 family of processors support extremely low operating temperatures, and its power-efficient 22 nm technology enables operation in the most demanding high-temperature environments.

This fully ruggedized system is designed to meet the rigorous standards of MIL-STD-810 and DO-160, while integrating the latest power-saving and performance-enhancing technology. The heat from the internal conduction-cooled modules is conducted to sidewall heat exchangers, where it is dissipated to the ambient environment by convection cooling or to an attached cold plate by conduction cooling. The system includes an integrated 28 VDC power supply and MIL-STD-461 EMI filtering.

Features

  • 21 10/100/1000BASE-T Gigabit Ethernet managed switch ports
  • Three 10/100/1000BASE-T Gigabit Ethernet router ports
  • One 10/100/1000BASE-T Gigabit Ethernet SBC port
  • Includes one XPedite8103 Intel® Atom™ E3800 family processor-based XMC/PMC module with up to 32 GB of Solid-State Storage and 8 GB of RAM
  • Includes two XChange3013 Gigabit Ethernet switches with Layer 2/3 management
  • Includes one XPedite5205 Cisco IOS® Gigabit Ethernet Embedded Services Router
  • XPedite5205 is NIST FIPS 140-2 Overall Level 1 validated on certificate #2242 and NIAP Common Criteria Certified
  • Layer 2 switching and Layer 3 routing management with extensive IEEE protocol and IETF RFC support (optional)
  • VICTORY Infrastructure Switch and Router support (optional)
  • Small Form Factor (SFF) sub-½ ATR system
  • Conduction- or convection- cooled chassis
  • Integrated 28 VDC power supply
  • MIL-STD-461E/F, MIL-STD-810, MIL-STD-704F qualified
  • Environmentally sealed
  • Circular connector support

Technical Specs

Physical Characteristics

  • Chassis dimensions and weight are dependent on configuration, contact factory for assistance

Ethernet Management Features (Optional)

  • Layer 2 switching and Layer 3 routing
  • Extensive IEEE protocol and IETF RFC support
  • Configuration through CLI or SNMP
  • 196 MB packet buffer
  • VICTORY Infrastructure Switch and Router support
  • XPedite5205 Cisco IOS® Gigabit Ethernet Embedded Services Router XMC

Ethernet Switch Features

  • IPv4 and IPv6 support
  • Support for jumbo frames up to 12 kB
  • Advanced cable open/short detection
  • Non-blocking, full wire-speed
  • IEEE 1588v2 and SyncE support (optional)

First Slot I/O (XChange3013 and XPedite8103)

  • 11 10/100/1000BASE-T Gigabit Ethernet ports from the XChange3013 3U VPX Gigabit Ethernet switch to J2
  • One 10/100/1000BASE-T Gigabit Ethernet port from the XPedite8103 XMC/PMC processor module to J2
  • One USB 2.0 port from the XPedite8103 to J2
  • One RS-232 port from the XPedite8103 to J2
  • One RS-232 port from the XChange3013 to J2

Second Slot I/O (XChange3013 and XPedite5205)

  • 10 10/100/1000BASE-T Gigabit Ethernet ports from the XChange3013 to J3
  • Three 10/100/1000BASE-T Gigabit Ethernet ports from the XPedite5205 Embedded Services Router to J3
  • Two RS-232 serial ports to J3

Slot-to-Slot Connectivity

  • Six 1000BASE-X Gigabit Ethernet ports

Power Supply

  • Integrated power supply
  • MIL-STD-704 28 VDC input voltage support
  • MIL-STD-461 EMI filtering

Thermal

  • The system is designed and tested to operate in ambient temperatures down to -40°C and extreme high temperatures. Maximum operating temperature is dependent on configuration and usage. Contact X-ES for further information.

Accessories

Documentation

Datasheet

To view all of the information about this product in a PDF, please download the datasheet.

Download Datasheet

Technical Documents

SupportNet is your source for product manuals, technical support, and software downloads.

Access SupportNet

Block Diagram

XPand6211 | Rugged Embedded System
XPand6211 — Rugged Embedded System

Information Request

Additional Information

Press Release
 

Press release for the XPand6211 Rugged System
 

View Press Release

Datasheet
 

View the XPand6211
Datasheet PDF
 

Download Datasheet

VPX Rugged Systems
 

View the full selection of VPX Rugged Systems by X-ES
 

View All

XMC/PMC Rugged Systems

View the full selection of XMC/PMC Rugged Systems
from X-ES

View All
Back to Top
Fast, Flexible, and Customer-Focused Embedded Solutions
© 2024 Extreme Engineering Solutions, Inc