XPedite5970

NXP (formerly Freescale) QorIQ T2080 Processor-Based Conduction- or Air-Cooled 3U VPX Single Board Computer (SBC)

The XPedite5970 provides a rugged, feature-rich processing solution that maximizes the performance-per-watt capabilities of a Power Architecture®-based processor module.

The T2080 processor offers eight virtual (four dual-threaded) e6500 cores, running at up to 1.8 GHz, and integrates a 128-bit AltiVec technology-based SIMD engine per core. The integrated AltiVec SIMD engines enable the XPedite5970 to support DSP-level Floating-Point performance and an extensive inventory of software libraries.

Learn more about this product below »
XPedite5970 3U VPX SBC
XPedite5970 3U VPX Single Board Computer (SBC) Top ShotXPedite5970 3U VPX Single Board Computer (SBC) Bottom Shot

The XPedite5970 is a 3U OpenVPX™ REDI single board computer based on the NXP (formerly Freescale) QorIQ T2080 processor. The XPedite5970 provides a rugged, feature-rich processing solution that maximizes the performance-per-watt capabilities of a Power Architecture®-based processor module. The T2080 processor offers eight virtual (four dual-threaded) e6500 cores, running at up to 1.8 GHz, and integrates a 128-bit AltiVec technology-based SIMD engine per core. The integrated AltiVec SIMD engines enable the XPedite5970 to support DSP-level Floating-Point performance and an extensive inventory of software libraries.

The XPedite5970 also supports up to 8 GB of DDR3-1600 SDRAM and provides a plethora of I/O options to the backplane, including 10 Gigabit Ethernet, PCIe Gen3, and Gen2 SRIO. The XPedite5970 provides superior growth and expansion capabilities by including an XMC or PMC site with full 10 mm I/O envelope support while maintaining a 0.8 in. VPX slot pitch, providing the system integrator with a wide variety of COTS options for additional I/O, storage, or processing while minimizing total system SWaP-C.

Wind River VxWorks, Linux, Green Hills INTEGRITY, and DDC-I’s Deos ARINC-653 and FACE compliant multicore RTOS and Deos DO-178 Certifiable Board Support Packages (BSPs) are available. Wind River VxWorks and Linux BSPs may optionally be paired with the NXP hypervisor software to facilitate secure partitioning.

Features

  • NXP QorIQ T2080 processor with eight virtual Power Architecture® e6500 cores at up to 1.8 GHz
  • 128-bit AltiVec technology-based SIMD engine
  • Compatible with multiple VITA 65 OpenVPX™ slot profiles
  • 3U VPX (VITA 46) module
  • Ruggedized Enhanced Design Implementation (REDI)
  • Conduction or air cooling
  • Up to 8 GB of up to DDR3-1600 ECC SDRAM
  • Up to 512 MB of NOR flash (with redundancy)
  • Up to 64 GB of NAND flash
  • Hardware write protection for non-volatile memory
  • XMC/PrPMC interface
  • x4 PCI Express or Serial RapidIO or 10GbE XAUI fabric Fat Pipe P1.A fabric interconnect
  • x4 PCI Express or Serial RapidIO Fat Pipe P1.B fabric interconnect
  • Two SerDes Gigabit Ethernet Thin Pipe P1 fabric interconnects
  • Two 10/100/1000BASE-T Ethernet ports (optional)
  • Two SATA ports to P2 or to J16
  • Up to two RS-232/422/485 serial ports to P2
  • Two USB 2.0 ports to P2 (optionally route one port to front panel via plugover module)
  • Front I/O available via plugover module
  • NXP hypervisor support for secure partitioning
  • Linux BSP
  • Wind River VxWorks BSP
  • Green Hills INTEGRITY BSP
  • DDC-I's Deos - ARINC-653 and FACE compliant multicore RTOS and DO-178 Certifiable Deos BSP

Technical Specs

Processor

  • NXP (formerly Freescale) QorIQ T2080 processor
  • Eight virtual (four dual-threaded) Power Architecture® e6500 cores at up to 1.8 GHz
  • 2 MB L2 cache
  • 512 kB platform cache
  • IEEE 754 Floating-Point Unit (FPU) support
  • 128-bit AltiVec technology-based SIMD engine

Memory

  • Up to 8 GB of up to DDR3-2133 ECC SDRAM
  • Up to 512 MB of NOR flash (with redundancy)
  • Up to 64 GB of NAND flash

Front Panel I/O

  • Front panel RJ-45 Ethernet, micro-DB-9 RS-232 serial ports, and USB 2.0 available via optional plugover module

VPX (VITA 46) P0 I/O

  • I²C port

VPX (VITA 46) P1 I/O

  • x4 PCI Express, Serial RapidIO or 10 GbE XAUI Fat Pipe to P1.A
  • x4 PCI Express or Serial RapidIO Fat Pipe to P1.B
  • Two SerDes Gigabit Ethernet ports (or one 10/100/1000BASE-T port to P1 and one 10/100/1000BASE-T port to P2)
  • X12d XMC P16 I/O

VPX (VITA 46) P2 I/O

  • One 10/100/1000BASE-T port (when two SerDes Gigabit Ethernet P1 ports are not used)
  • Two RS-232/422/485 serial ports
  • Two USB 2.0 ports
  • I²C port
  • 3.3 V GPIO signals
  • P64s PMC P14 I/O (optional)
  • Two SATA ports capable of 6 Gb/s

XMC/PrPMC Site

  • 32-bit, 66 MHz PCI bus (PMC interface)
  • x4 PCIe port (XMC interface)
  • P64s P14 I/O support (optional)
  • X12d P16 I/O support

Software Support

Physical Characteristics

  • 3U VPX-REDI conduction- or air-cooled form factor
  • Dimensions: 100 mm x 160 mm
  • 0.8 in. pitch without solder-side cover
  • 0.85 and 1.0 in. pitch with solder-side cover

Environmental Requirements

Contact factory for appropriate board configuration based on environmental requirements.

  • Supported ruggedization levels (see the X-ES Ruggedization Chart): 1, 3, 5
  • Conformal coating available as an ordering option

Power Requirements

  • Power will vary based on configuration and usage. Please consult factory.

Accessories

  • XIt1070 (90060170) - 3U VPX Rear Transition Module with Gigabit Ethernet, SATA, USB, Serial, and DVI
  • XPand1004 (90071810) - Two-Slot 3U VPX Development Platform for Conduction-Cooled Modules with RTM I/O
  • XPand1200 (90070530) - 3U VPX Conduction-Cooled Development Platform
  • XPand1300 (90070415) - 3U VPX Air-Cooled Development Platform
  • XTend200 (90070050) - Debug Module with JTAG/Serial/Ethernet Cable

Documentation

Datasheet

To view all of the information about this product in a PDF, please download the datasheet.

Download Datasheet

Technical Documents

SupportNet is your source for product manuals, technical support, and software downloads.

Access SupportNet

Block Diagram

XPedite5970 3U VPX SBC
XPedite5970 — 3U VPX Single Board Computer

Information Request

Additional Information

NXP Hypervisor

NXP hypervisor software for secure partitioning

View Hypervisor

Press Release

NXP QorIQ T-Series
Products Press Release

View Press Release

Product Brief

NXP T-Series SBCs
Product Brief

View Brief

Datasheet

View the XPedite5970
Datasheet PDF

Download Datasheet

3U VPX SBCs

View the full selection of 3U VPX SBCs from X-ES

View All
Back to Top
Fast, Flexible, and Customer-Focused Embedded Solutions
© 2024 Extreme Engineering Solutions, Inc