Product Name:
XCalibur4530 4th Gen Intel Core i7 6U VME Single Board Computer SBC

XCalibur4530

4th Generation Intel® Core™ i7 Haswell Processor-Based Conduction- or Air-Cooled 6U VME Module

The XCalibur4530 is a high-performance 6U VME single board computer that is ideal for ruggedized systems requiring high-bandwidth processing and low power consumption. With the 4th generation Intel® Core™ i7 Haswell processor, the XCalibur4530 delivers enhanced performance and efficiency for today's network information processing and embedded computing applications.

The XCalibur4530 provides up to 16 GB DDR3L-1600 ECC SDRAM in two separate channels, two PrPMC/XMC slots, and up to 64 GB of NAND flash. The XCalibur4530 also hosts numerous I/O ports, including Gigabit Ethernet, USB, SATA, graphics, mezzanine I/O, and RS-232/422/485 through the backplane connectors.

The XCalibur4530 is a powerful, feature-rich solution for the next generation of compute-intensive embedded applications. Wind River VxWorks and Linux Board Support Packages (BSPs) are available, as well as Microsoft Windows drivers.

  • Supports 4th generation Intel® Core™ i7 processors
  • 6U VME module
  • Conduction or air cooling
  • Up to 16 GB of DDR3L-1600 ECC SDRAM in two channels
  • Up to 64 GB of NAND flash
  • Four Gigabit Ethernet ports
  • Two PMC/XMC interfaces
  • Two HDMI/DVI-D or Dual-Mode DisplayPort interfaces
  • Three USB 2.0 ports
  • One SATA port
  • Two RS-232/422/485 serial ports
  • Intel® vPro™/AMT support
  • Wind River VxWorks BSP
  • Linux BSP
  • Microsoft Windows drivers
  • Contact factory for availability of Green Hills INTEGRITY, QNX Neutrino, and LynuxWorks BSPs
XCalibur4530 Block Diagram

Click on the image above to view a larger version.

Processor

  • 4th generation Intel® Core™ i7
  • Integrated high-performance 3D graphics controller

Memory

  • Up to 16 GB of DDR3L-1600 ECC SDRAM in two channels
  • Up to 64 GB of NAND flash
  • 64 MB NOR boot flash
  • 64 kB EEPROM

VME

  • VME64 (VITA 1-1994 R2002)
  • VME64x (VITA 1.1-1997 R2003)
  • 2eSST (VITA 1.5-2003)
  • Ethernet on VME64x (VITA 31.1-2003)
  • PMC I/O on VME (VITA 35-2000)

PrPMC\XMC

  • PCI-X (64/32-bit, 100/66 MHz)
  • PCI (64/32-bit, 66/33 MHz)
  • x8 PCI Express Gen3-capable port

Front Panel I/O (Optional)

  • Dual-Mode DisplayPort interface
  • One 10/100/1000BASE-T Ethernet port
  • One USB 2.0 port
  • General-purpose LEDs

Rear Panel I/O

  • Three 10/100/1000BASE-T Ethernet ports
  • One SATA port
  • Two USB 2.0 ports
  • HDMI/DVI-D or Dual-Mode DisplayPort interface
  • Two RS-232/422/485 serial ports
  • PMC I/O

Additional Features

  • Non-volatile memory write protection
  • Optional Trusted Platform Module (TPM)
  • Optional VITA 38-2003 IPMI Controller (IPMC)
  • IEEE 1588 support on three Gigabit Ethernet ports
  • Intel® Active Management Technology (AMT) supported by Intel® vPro™ Technology

Physical Characteristics

  • 6U VME conduction- or air-cooled form factor
  • Dimensions: 233 mm x 160 mm

Software Support

  • Wind River VxWorks BSP
  • Linux BSP
  • Microsoft Windows drivers
  • Contact factory for availability of Green Hills INTEGRITY, QNX Neutrino, and LynuxWorks LynxOS BSPs

Environmental Requirements

  • Supported ruggedization levels (see the X-ES Ruggedization Chart): 1, 3, 5
  • Conformal coating available as an ordering option
  • Thermal performance will vary based on CPU frequency and application

Power Requirements

  • Power will vary based on configuration and usage. Please consult factory.