close product finder
           
Product Name:
XPedite7530 4th Gen Intel Core i7 Haswell 3U cPCI Single Board Computer SBC

XPedite7530

4th Generation Intel® Core™ i7 Haswell Processor-Based Conduction- or Air-Cooled 3U CompactPCI Module

Click to enlarge product image

The XPedite7530 is a high-performance 3U CompactPCI single board computer that is ideal for ruggedized systems requiring high-bandwidth processing and low power consumption. With the 4th generation Intel® Core™ i7 Haswell processor, the XPedite7530 delivers enhanced performance and efficiency for today's network information processing and embedded computing applications.

Complementing processor performance, the XPedite7530 features up to 16 GB of DDR3L-1600 ECC SDRAM, PrPMC/XMC support, and up to 32 GB of NAND flash. The XPedite7530 also hosts numerous I/O ports, including Gigabit Ethernet, USB, SATA, graphics, and RS-232/422/485 through the backplane connectors.

The XPedite7530 is a powerful, feature-rich solution for the next generation of compute-intensive embedded applications. Wind River VxWorks and Linux Board Support Packages (BSPs) are available, as well as Microsoft Windows drivers.

  • Supports 4th generation Intel® Core™ i7 processors
  • 3U CompactPCI module
  • Configurable as system controller or peripheral
  • Conduction or air cooling
  • Up to 16 GB of DDR3L-1600 ECC SDRAM in two channels
  • Up to 32 GB of NAND flash
  • PMC/XMC interface
  • Two Gigabit Ethernet ports
  • Four SATA ports
  • Two USB 2.0 ports
  • One graphics port
  • Two RS-232/422/485 serial ports
  • Intel® vPro™/AMT support
  • Wind River VxWorks BSP
  • Linux BSP
  • Microsoft Windows drivers
  • Contact factory for availability of Green Hills INTEGRITY, QNX Neutrino, and LynuxWorks LynxOS BSPs
XPedite7530 Block Diagram

Click on the image above to view a larger version.

Processor

  • 4th generation Intel® Core™ i7
  • Integrated high-performance 3D graphics controller

Memory

  • Up to 16 GB of DDR3L-1600 ECC SDRAM on two channels
  • Up to 32 GB of NAND flash
  • 64 MB NOR boot flash
  • 64 kB EEPROM

J1 cPCI Interface

  • 32-bit PCI interface operating at 33 MHz or 66 MHz
  • System controller-capable with onboard clocking and arbitration
  • Peripheral slot-capable

J2 cPCI Interface

  • Two 10/100/1000BASE-T Gigabit Ethernet ports
  • Four SATA ports
  • Two USB 2.0 ports
  • HDMI/DVI-D or Dual-Mode DisplayPort interface
  • Two RS-232/422/485 serial ports
  • 3.3 V GPIO signals

PrPMC/XMC Site

  • 32-bit, 33 MHz PCI bus (PMC interface)
  • x8 PCI Express Gen3-capable port (XMC interface)
  • One SATA port (XMC interface)

Additional Features

  • Non-volatile memory write protection
  • Optional Trusted Platform Module (TPM)
  • IEEE 1588 support on one Gigabit Ethernet port
  • Intel® Active Management Technology (AMT) supported by Intel® vPro™ Technology

Software Support

  • Wind River VxWorks BSP
  • Linux BSP
  • Microsoft Windows drivers
  • Contact factory for availability of Green Hills INTEGRITY, QNX Neutrino, and LynuxWorks LynxOS BSPs

Physical Characteristics

  • 3U cPCI conduction- or air-cooled form factor
  • Dimensions: 100 mm x 160 mm

Environmental Requirements

  • Supported ruggedization levels (see the X-ES Ruggedization Chart): 1, 3, 5
  • Conformal coating available as an ordering option

Power Requirements

  • Power will vary based on configuration and usage. Please consult factory.