3U VPX SINGLE BOARD COMPUTER · SKU 90030165
XPedite7172
End of Life
Contact X-ES Sales for assistance with choosing a recommended replacement product.
The XPedite7172 is a high-performance, low-power 3U VPX-REDI single board computer based on the Intel® Core™2 Duo processor.
Product Lifecycle
X-ES also offers comprehensive configuration and obsolescence management services, providing customers with direct control over non-interchangeable changes and extending product availability and serviceability well beyond standard end-of-life milestones.
Engineered for Extended Reliability
All X-ES products are designed and manufactured 100% in the USA with components from trusted supply chains in order to deliver rugged, reliable performance in the most demanding environments.
Built with components rated for extreme conditions and validated through rigorous testing, our solutions minimize obsolescence risk and lower total cost of ownership across the full program lifespan.
Introduction to XPedite7172
The XPedite7172 is a high-performance, low-power 3U VPX-REDI single board computer based on the Intel® Core™2 Duo processor.
High-Bandwidth Performance
With two x4 PCI Express P1 interconnects and two Gigabit Ethernet ports, the XPedite7172 is ideal for high-bandwidth data-processing applications.
Memory
The XPedite7172 accommodates up to 4 GB of DDR2-400 ECC SDRAM to support memory-intensive applications.
I/O Connectivity
The XPedite7172 hosts numerous I/O ports including Gigabit Ethernet, USB 2.0, SATA, and RS-232/422/485 through the P2 backplane connector.
Backplane Slot Options
The XPedite7172 can be used in either the system slot or peripheral slot of a VPX backplane.
Software Support
Linux, Wind River VxWorks, QNX Neutrino, and Green Hills INTEGRITY Board Support Packages (BSPs), as well as Microsoft Windows drivers, are available.
Processor
- Intel® Core™2 Duo at up to 1.8 GHz
- Up to 200 MHz (800 MT/s) FSB
- Up to 6 MB of L2 cache
Memory
- Up to 4 GB of DDR2-400 ECC SDRAM
- Up to 2 MB firmware hub flash (or 1 MB with redundancy)
- 4 GB of NAND flash
VPX (VITA 46) P1 I/O
- x4 PCI Express interface to P1.A
- x4 PCI Express interface to P1.B
- Two SerDes Gigabit Ethernet ports (or one 10/100/1000BASE-T port out P1 and one out P2)
- X12d XMC P16 I/O
VPX (VITA 46) P2 I/O
- One 10/100/1000 Mbps Gigabit Ethernet port (optional)
- Six SATA 1.5 Gb/s ports (optional)
- Two USB 2.0 ports (optional)
- Two RS-232/422/485 serial ports
- I²C port
- 3.3 V GPIO signals
- P64s P14 I/O
XMC Site
- x4 PCIe port
- P64s P14 I/O support
- X12d P16 I/O support
Front Panel I/O
- Front panel RJ-45 Ethernet, USB, and micro-DB-9 RS-232 serial ports available via optional plugover module
Software
- Linux BSP
- Wind River VxWorks BSP
- QNX Neutrino BSP
- Green Hills INTEGRITY BSP
- Microsoft Windows drivers
Physical Characteristics
- 3U VPX-REDI conduction- or air-cooled form factor
- Dimensions: 100 mm x 160 mm
- 0.8 in. pitch without solder-side cover
- 0.85 and 1.0 in. pitch with solder-side cover
Environmental Requirements
Contact factory for appropriate board configuration based on environmental requirements.
- Supported ruggedization levels (see the X-ES Ruggedization Chart): 1, 3, 5
- Conformal coating available as an ordering option
Power Requirements
- Maximum power consumption: 37 W (with 1.8 GHz processor), 28 W (with 1.2 GHz processor)
XPedite7172
Intel® Core™2 Duo Processor-Based Conduction- or Air-Cooled 3U VPX-REDI Single Board Computer (SBC)
Connect with a product expert today
Access technical documentation, board support packages, software, and other resources for working with the XPedite7172. All X-ES products are backed by our four-hour customer support guarantee.
Datasheet
To view all of the information about this product in a PDF, please download the datasheet.
Technical Documentation
SupportNet is your source for hardware manuals, technical support, and software downloads.
