3U VPX SINGLE BOARD COMPUTER · SKU 90075380
XPedite8270
The XPedite8270 is a secure, high-performance, 3U VPX-REDI, single board computer aligned to the Sensor Open System Architecture (SOSA) I/O Intensive profile (SLT3-1F1F2U1TU1T1U1T-14.2.16).
Based on the 13th Gen Intel® Core™ i7 series (formerly Raptor Lake-P) line of processors, the XPedite8270 is an ideal choice for applications requiring maximum data and information protection along with high performance and power savings.
Product Lifecycle
Built with components rated for extreme conditions and validated through rigorous testing, our solutions minimize obsolescence risk and lower total cost of ownership across the full program lifespan.
Engineered for Extended Reliability
All X-ES products are designed and manufactured 100% in the USA with components from trusted supply chains in order to deliver rugged, reliable performance in the most demanding environments.
X-ES also offers comprehensive configuration management solutions that extend product support and availability beyond final sale, keeping systems running long after standard end-of-life milestones.
Introduction to XPedite8270
The XPedite8270 is a secure, high-performance, 3U VPX-REDI, single board computer based on the 13th Gen Intel® Core™ i7 series (formerly Raptor Lake-P) line of processors. The XPedite8270 is an ideal choice for applications requiring maximum data and information protection along with high performance and power savings.
Ruggedized, Standards-Based Design
The XPedite8270 is aligned to the Sensor Open System Architecture (SOSA) I/O Intensive profile (SLT3-1F1F2U1TU1T1U1T-14.2.16) and to AMPS profile MODA3-16.2.15-1-F2C-(E8)(P4F)(2E7-E3)(P3U-D1-U1,1P3U~-U1-M3/M4/M5-G1)
Security & Data Protection
The XPedite8270 integrates SecureCOTS™ technology with a Microchip PolarFire™ System-on-Chip (SoC) FPGA for hosting custom functions to protect data from being modified or observed and provides an ideal solution when stringent security capabilities are required.
Memory & I/O Connectivity
The XPedite8270 provides fast and efficient I/O with one 40GBASE-KR4, two 10GBASE-KR, and one 10/100/1000BASE-T Ethernet ports.
It supports 64 GB of LPDDR5 SDRAM with in-band ECC in four channels, in addition to numerous I/O ports, including USB 2.0, PCI Express, RS-232 or RS-422/485 serial, and DisplayPort video through the backplane connectors.
Expansion Capabilities
The XPedite8270 provides additional expansion capabilities by including an integrated XMC site. This XMC site includes a x4 PCI Express connection to the Intel® Core™ i7 processor and X12d, X16s, and X8d I/O mapped directly to the VPX backplane connectors.
Software Support
Wind River VxWorks, X-ES Enterprise Linux (XEL), and Linux Yocto Board Support Packages (BSPs) are available. The XPedite8270 also supports RDMA over Converged Ethernet (RoCE) v2 internet layer protocol.
Processor
- Supports 13th Gen Intel® Core™ i7 series (formerly Raptor Lake-P) processors
Memory
- 64 GB of LPDDR5 SDRAM with in-band ECC
- 256 GB of UFS NAND flash
- 64 MB NOR boot flash
- 64 kB EEPROM
Security and Management
- Microchip PolarFire™ SoC FPGA with 256 MB SPI NOR flash
- Designed with SecureCOTS™ technology to support enhanced security and trusted computing
- System voltage monitor, power-on/reset control, non-volatile write-protection control
- Trusted Platform Module (TPM) 2.0
- IPMI Controller (IPMC), supporting Tier 1, Tier 2, and Tier 3 operating modes
VPX (VITA 46) P0 I/O
- Two IPMB connections to an IPMI Controller
VPX (VITA 46) P1 I/O
- One 40GBASE-KR4 Ethernet port to P1.A
- Two 10GBASE-KR Ethernet ports
- One x4 PCI Express Gen4-capable interface
- XMC X12d I/O
- One maintenance serial port, software configurable to LVTTL or RS-232
- One single-ended FPGA GPIO
VPX (VITA 46) P2 I/O
- One 10/100/1000BASE-T Ethernet port
- One DisplayPort HBR2-capable interface
- One x2 PCI Express Gen3-capable interface
- Two USB 2.0 ports
- Two RS-232 serial ports or one RS-422/485 serial port
- Three single-ended FPGA GPIOs
- XMC X8d I/O
- XMC X16s I/O
Software Support
- RDMA over Converged Ethernet (RoCE) v2 internet layer protocol support
- UEFI firmware
- Wind River VxWorks BSP
- X-ES Enterprise Linux (XEL) BSP
- Linux Yocto BSP
- Contact factory for availability of Microsoft Windows drivers and other operating systems
XMC Site
- One x4 PCI Express Gen3-capable interface
Physical Characteristics
- 3U VPX-REDI conduction- or air-cooled form factor
- Supports SOSA I/O Intensive profile (SLT3-1F1F2U1TU1T1U1T-14.2.16)
- SOSA-aligned to AMPS profile MODA3-16.2.15-1-F2C-(E8)(P4F)(2E7-E3)(P3U-D1-U1,1P3U~-U1-M3/M4/M5-G1)<XA0>
- Dimensions: 100 mm x 160 mm
- 1.0 in. pitch with Two-Level Maintenance (2LM) support
Environmental Requirements
Contact factory for appropriate board configuration based on environmental requirements
- Supported ruggedization levels (see the X-ES Ruggedization Chart): 5
- Conformal coating available as an ordering option
- Thermal performance will vary based on CPU frequency and application
- Contact X-ES for air-cooled development options
Power Requirements
- Power will vary based on configuration and usage. Please consult factory.
Accessories
- XIt1099 (90040110) – 3U VPX Rear Transition Module with 40 Gigabit and 10 Gigabit Ethernet, USB, Serial, and XIM Site
- XPand1007 (90075300) – Two-Slot 3U VPX Development Platform for Conduction-Cooled Modules with RTM I/O
- XTend230 (90072690) – Debug Module for Programming and Diagnostic Interfaces
XPedite8270
13th Gen Intel® Core™ i7 Processor-Based 3U VPX-REDI Module with 64 GB of LPDDR5 and Microchip PolarFire™ SoC FPGA
Connect with a product expert today
Access technical documentation, board support packages, software, and other resources for working with the XPedite8270. All X-ES products are backed by our four-hour customer support guarantee.
Datasheet
To view all of the information about this product in a PDF, please download the datasheet.
Technical Documentation
SupportNet is your source for hardware manuals, technical support, and software downloads.
