close product finder
           
Product Name:
XPedite7501 4th Gen Intel Core i7 Haswell XMC Processor Mezzanine

XPedite7501

4th Generation Intel® Core™ i7 Haswell Processor-Based Conduction- or Air-Cooled XMC Module

Click to enlarge product image

The XPedite7501 is a high-performance, low-power, XMC module based on the 4th generation Intel® Core™ i7 Haswell processor. With up to three PCI Express Gen3-capable ports and two Gigabit Ethernet ports, the XPedite7501 is ideal for high-bandwidth data processing applications. Floating-point-intensive applications such as radar, image processing, and signals intelligence will benefit from the performance boost provided by the Intel® Advanced Vector Extensions 2.0 (Intel® AVX2).

The XPedite7501 accommodates up to 16 GB of DDR3L-1600 ECC SDRAM in two channels to support memory-intensive applications and hosts numerous I/O ports, including Gigabit Ethernet, USB, SATA, graphics, and RS-232/422/485.

Wind River VxWorks and Linux Board Support Packages (BSPs) are available, as well as Microsoft Windows drivers.

  • Supports 4th generation Intel® Core™ i7 processors
  • XMC (VITA 42) module
  • Conduction or air cooling
  • Up to 16 GB of DDR3L-1600 ECC SDRAM in two channels
  • Up to 32 GB of NAND flash
  • Two x4 or one x8 PCI Express Gen3-capable P15 XMC interface
  • One x4 PCI Express P16 XMC interface
  • Two Gigabit Ethernet ports
  • Four USB 2.0 high-speed ports
  • Two SATA ports
  • Two RS-232/422/485 serial ports
  • HDMI/DVI-D or Dual-Mode DisplayPort interface
  • Intel® vPro™/AMT support
  • Wind River VxWorks BSP
  • Linux BSP
  • Microsoft Windows drivers
  • Contact factory for availability of Green Hills INTEGRITY, QNX Neutrino, and LynuxWorks LynxOS BSPs
XPedite7501 Block Diagram

Click on the image above to view a larger version.

Processor

  • 4th generation Intel® Core™ i7
  • Integrated high-performance 3D graphics controller

Memory

  • Up to 16 GB of DDR3L-1600 ECC SDRAM in two channels
  • Up to 32 GB of NAND flash
  • 64 MB NOR boot flash
  • 64 kB EEPROM

P14 PMC Interface

  • Two USB 2.0 ports
  • Two RS-232/422/485 ports
  • Two 10/100/1000BASE-T Ethernet ports
  • Four 3.3 V GPIO signals

P15 XMC Interface

  • One x8 or two x4 PCI Express Gen3-capable links
  • Four 3.3 V GPIO signals

P16 XMC Interface

  • HDMI/DVI-D or Dual-Mode DisplayPort interface
  • Two USB 2.0 ports
  • Two SATA ports
  • One x4 PCI Express Gen3-capable link

Additional Features

  • Non-volatile memory write protection
  • Optional Trusted Platform Module (TPM)
  • IEEE 1588 support on one Gigabit Ethernet port
  • Intel® Active Management Technology (AMT) supported by Intel® vPro™ Technology

Software Support

  • Wind River VxWorks BSP
  • Linux BSP
  • Microsoft Windows drivers
  • Contact factory for availability of Green Hills INTEGRITY, QNX Neutrino, and LynuxWorks LynxOS BSPs

Physical Characteristics

  • XMC form factor
  • Dimensions: 149 mm x 74 mm, 10 mm stacking height

Environmental Requirements

  • Supported ruggedization levels (see the X-ES Ruggedization Chart): 1, 3, 5
  • Conformal coating available as an ordering option
  • Thermal performance will vary based on CPU frequency and application

Power Requirements

  • Power will vary based on configuration and usage. Please consult factory.