The XPedite7872 is a secure, high performance single board computer aligned to the Sensor Open System Architecture (SOSA) standard. It is based on the Intel® Xeon® D-2800 series (formerly Eddy Lake) of processors, making it an optimal choice for computationally heavy applications requiring maximum data and information protection.
This 3U VPX-REDI module integrates SecureCOTS™ technology with a Microsemi® PolarFire™ System-on-Chip (SoC) FPGA for hosting custom functions to protect data from being modified or observed and provides an ideal solution when stringent security capabilities are required.
The XPedite7872 provides incredible speed with one 100GBASE-KR4 Ethernet port, one 25G/10GBASE-KR Ethernet port, and one 1000BASE-KX Ethernet port (also available as one 10GBASE-KR Ethernet port through build configuration). These Gigabit Ethernet ports offer fallback redundancy to help ensure a consistent processor throughput of up to 100 Gbps is available at all times.
The XPedite7872 also accommodates up to 64 GB of DDR4 ECC SDRAM in four channels and up to 256 GB of onboard NAND flash, in addition to four x4 PCI Express Gen3-capable interfaces (also configurable as two x8 interfaces or one x16 interface).
Compatible with SOSA module profile SLT3-PAY-1F1U1S1S1U1U4F1J-14.6.13-0, the XPedite7872 is the perfect fit for high-throughput compute workloads, delivering the performance and scalability needed for demanding applications.
Wind River VxWorks and X-ES Enterprise Linux (XEL) Board Support Packages (BSPs) are available.
Technical Specs
Processor
- Intel® Xeon® D-2800 series (formerly Eddy Lake) processor
- Up to 20 Xeon®-class cores in a single, power-efficient SoC package
- SKUs available with native extended temperature support
Memory
- 64 GB of DDR4 ECC SDRAM in four channels
- 256 GB of onboard NAND flash
- 64 MB NOR boot flash
- 64 kB EEPROM
Security and Management
- Microsemi® PolarFire™ SoC FPGA with 256 MB SPI flash
- Designed with SecureCOTS™ technology to support enhanced security and trusted computing
- System voltage monitor, power-on/reset control, non-volatile write-protection control
- Trusted Platform Module (TPM)
VPX (VITA 46) P1 I/O
- One 100GBASE-KR4 Ethernet port to P1.A
- One 25G/10GBASE-KR Ethernet port and one 1000BASE-KX Ethernet port (with build option for 10GBASE-KR Ethernet) to P1.B
- Ethernet ports allow up to 100 Gbps aggregate processor throughput
- One FPGA LVDS pair
- Two serial maintenance ports
- One single-ended FPGA GPIO
- One x4 PCI Express Gen3-capable interface to P1.C
- One x4 PCI Express Gen3-capable interface to P1.D
VPX (VITA 46) P2 I/O
- One x4 PCI Express Gen3-capable interface to P2.A
- One x4 PCI Express Gen3-capable interface to P2.B
Software Support
- RDMA over Converged Ethernet (RoCE) v2 internet layer protocol support
- UEFI firmware
- Wind River VxWorks BSP
- X-ES Enterprise Linux (XEL) BSP
- Contact factory for availability of Microsoft Windows drivers and other operating systems
Physical Characteristics
- 3U VPX-REDI conduction-cooled form factor
- Compatible with SOSA module profile SLT3-PAY-1F1U1S1S1U1U4F1J-14.6.13-0
- Dimensions: 100 mm x 160 mm
- 0.8 in. pitch without solder-side cover
- 1.0 in. pitch with Two-Level Maintenance (2LM) support
Environmental Requirements
Contact factory for appropriate board configuration based on environmental requirements
- Supported ruggedization levels (see the X-ES Ruggedization Chart): 5
- Conformal coating available as an ordering option
- Thermal performance will vary based on CPU frequency and application
- Contact X-ES for air-cooled development options
Power Requirements
- SOSA Power: +12 V and +3.3 V_AUX (+5 V and +3.3 V not required)
Documentation
Datasheet
To view all of the information about this product in a PDF, please download the datasheet.
Download Datasheet
Technical Documents
SupportNet is your source for product manuals, technical support, and software downloads.
Access SupportNet
