3U VPX SINGLE BOARD COMPUTER · SKU 90030580
XPedite7680
Not Recommended for New Designs
Contact X-ES Sales for assistance with choosing a recommended replacement product.
The XPedite7680 is a high-performance, 3U VPX-REDI, single board computer based on the Intel® Xeon® D-1500 family processors (formerly Broadwell-DE).
The Intel® Xeon® D processor can provide up to 16 Xeon®-class cores in a single, power-efficient System-on-Chip (SoC) package.
Product Lifecycle
X-ES also offers comprehensive configuration and obsolescence management services, providing customers with direct control over non-interchangeable changes and extending product availability and serviceability well beyond standard end-of-life milestones.
Engineered for Extended Reliability
All X-ES products are designed and manufactured 100% in the USA with components from trusted supply chains in order to deliver rugged, reliable performance in the most demanding environments.
Built with components rated for extreme conditions and validated through rigorous testing, our solutions minimize obsolescence risk and lower total cost of ownership across the full program lifespan.
Introduction to XPedite7680
The XPedite7680 is a high-performance, 3U VPX-REDI, single board computer based on the Intel® Xeon® D-1500 family processors (formerly Broadwell-DE).
The Intel® Xeon® D processor can provide up to 16 Xeon®-class cores in a single, power-efficient System-on-Chip (SoC) package.
Network Performance
The XPedite7680 maximizes network performance with two 10GBASE-KR Ethernet ports and one 10/100/1000BASE-T Ethernet port.
PCI Express & Backplane Connectivity
Up to eight PCI Express Gen3 lanes are routed to the backplane P1 connector, supporting a single x8 PCIe interface or two x4 PCIe interfaces.
This interface also supports Non-Transparent Bridging, enabling direct communication with other Intel® processors, and there is no need for a separate switch module in the system, further reducing SWaP-C for the system integrator.
Expansion Capabilities
The XPedite7680 provides superior growth and expansion capabilities through an XMC site, while maintaining a 0.8 in. VPX slot pitch (12-core processor configurations require 1.0 in. pitch).
This gives system integrators a plethora of COTS options for additional I/O, storage, or processing.
Standards-Based Design
The XPedite7680 has orderable options supporting a SOSA-aligned pinout compatible with backplane slot profile 1F1F2U1TU1T1U1T-14.2.16.
Memory, I/O & Software Support
The XPedite7680 accommodates up to 32 GB of DDR4 ECC SDRAM in two channels to support memory-intensive applications. The XPedite7680 also hosts numerous I/O ports, including USB, SATA, and RS-232/422/485 serial through the backplane connectors.
Wind River VxWorks and X-ES Enterprise Linux Support Packages (XEL) are available.
Processor
- Intel® Xeon® D-1500 family processors (formerly Broadwell-DE)
- Up to 16 Xeon®-class cores in a single, power-efficient SoC package
- 4, 8, or 12 core SKUs available with native extended temperature support
Memory
- Up to 32 GB of DDR4 ECC SDRAM in two channels
- Up to 128 GB of SLC NAND flash
- 32 MB NOR boot flash
- 64 kB EEPROM
VPX (VITA 46) P0 I/O
- VITA 46.11 Tier 1 and Tier 2 IPMI Controller (IPMC)
- 1 Pulse Per Second (1PPS)
VPX (VITA 46) P1 I/O
- x4 PCI Express Gen3-capable interface to P1.A
- x4 PCI Express Gen3-capable interface to P1.B
- Two 10GBASE-KR Ethernet ports
- XMC P16 I/O, mapping P1w9-X12d per VITA 46.9
- 3.3 V GPIO signals
VPX (VITA 46) P2 I/O
- One 10/100/1000BASE-T Gigabit Ethernet port
- Two SATA ports capable of 6 Gb/s
- Two USB 2.0 ports
- One RS-232/422/485 serial port
XMC Site
- x8 PCI Express Gen3-capable interface
- X12d P16 I/O
Additional Features
- Non-volatile memory write protection
- Trusted Platform Module (TPM 2.0)
- IEEE 1588 support on one Gigabit Ethernet port
Software Support
- Wind River VxWorks BSP
- X-ES Enterprise Linux (XEL) BSP
- Contact factory for availability of Microsoft Windows drivers and other operating systems
Physical Characteristics
- 3U VPX-REDI conduction- or air-cooled form factor
- SOSA-aligned pinout compatible with backplane slot profile 1F1F2U1TU1T1U1T-14.2.16
- Dimensions: 100 mm x 160 mm
- 0.8 in. pitch without solder-side cover (optional)
- 1.0 in. pitch with Two-Level Maintenance (2LM) support
Environmental Requirements
Contact factory for appropriate board configuration based on environmental requirements.
- Supported ruggedization levels (see the X-ES Ruggedization Chart): 5
- Conformal coating available as an ordering option
- Contact X-ES for air-cooled development options
Power Requirements
- Power will vary based on configuration and usage. Please consult factory.
Accessories
- XIt1085 (90040045) – 3U VPX Rear Transition Module with Gigabit Ethernet, SATA, USB, Serial, and DisplayPort
- XPand1004 (90071810) – Two-Slot 3U VPX Development Platform for Conduction-Cooled Modules with RTM I/O
- XPand1200 (90070530) – 3U VPX Development Platform for Up to Eight Conduction-Cooled Modules
- XPand1203 (90072665) – 3U VPX Development Platform for Up to Eight Conduction-Cooled Modules
- XTend218 (90072500) – Debug Module/Cable with Serial/I²C/USB/JTAG/SPI and Power Supply Programming
XPedite7680
Intel® Xeon® D-1500 Family Processor-Based 3U VPX-REDI Module with Dual 10 Gigabit Ethernet and XMC Site
Connect with a product expert today
Access technical documentation, board support packages, software, and other resources for working with the XPedite7680. All X-ES products are backed by our four-hour customer support guarantee.
Datasheet
To view all of the information about this product in a PDF, please download the datasheet.
Technical Documentation
SupportNet is your source for hardware manuals, technical support, and software downloads.
