6U VME SINGLE BOARD COMPUTER · SKU 90055055
XCalibur4730
The XCalibur4730 is a secure, high-performance, 6U VME, single board computer based on the Intel® Xeon® D-1700 series (formerly Ice Lake-D) of processors. The XCalibur4730 is an optimal choice for computationally heavy applications requiring maximum data protection.
Product Lifecycle
X-ES also offers comprehensive configuration and obsolescence management services, providing customers with direct control over non-interchangeable changes and extending product availability and serviceability well beyond standard end-of-life milestones.
Engineered for Extended Reliability
All X-ES products are designed and manufactured 100% in the USA with components from trusted supply chains in order to deliver rugged, reliable performance in the most demanding environments.
Built with components rated for extreme conditions and validated through rigorous testing, our solutions minimize obsolescence risk and lower total cost of ownership across the full program lifespan.
Introduction to XCalibur4730
The XCalibur4730 is a secure, high-performance, 6U VME, single board computer based on the Intel® Xeon® D-1700 series (formerly Ice Lake-D) of processors. The XCalibur4730 is an optimal choice for computationally heavy applications requiring maximum data protection.
Security & Data Protection
The XCalibur4730 integrates SecureCOTS™ technology with a Microchip PolarFire™ System-on-Chip (SoC) FPGA for hosting custom functions to protect data from being modified or observed and provides an ideal solution when stringent security capabilities are required.
Memory & I/O
In addition to providing three 10/100/1000BASE-T Ethernet ports, the XCalibur4730 accommodates up to 48 GB of DDR4 ECC SDRAM in three channels and up to 32 GB of onboard SLC NAND flash.
Expansion Capabilities
The XCalibur4730 provides additional expansion capabilities by including two integrated XMC/PMC sites. These sites each include a x8 PCI Express connection to the Intel® Xeon® D processor.
Each mezzanine site offers a single PMC connector, providing an I/O connection to the VME backplane connectors in addition to the USB and RS-232/422/485 ports.
Front Panel I/O
An optional front panel is available on some configurations, with two 10/100/1000BASE-T Ethernet ports, one USB 2.0 port, and an additional USB 2.0 port for USB-to-UART provided.
Software Support
Wind River VxWorks, X-ES Enterprise Linux (XEL), and Linux Yocto Board Support Packages (BSPs) are available.
Processor
- Intel® Xeon® D-1700 series (formerly Ice Lake-D) processor
- Up to 10 Xeon®-class cores in a single, power-efficient SoC package
- SKUs available with native extended temperature support
Memory
- 48 GB of DDR4 ECC SDRAM in three channels
- 32 GB of SLC NAND flash
- 64 MB NOR boot flash
- 64 kB EEPROM
Security and Management
- Microchip PolarFire™ SoC FPGA with 256 MB SPI flash
- Designed with SecureCOTS™ technology to support enhanced security and trusted computing
- System voltage monitor, power-on/reset control, non-volatile write-protection control
- Trusted Platform Module (TPM)
VME
- VME64 (VITA 1-1994 R2002)
- VME64x (VITA 1.1-1997 R2003)
- 2eSST (VITA 1.5-2003)
- Ethernet on VME64x (VITA 31.1-2003)
- PMC I/O on VME (VITA 35-2000)
XMC
- x8 PCI Express Gen3-capable interface to J15 and J25
Front Panel I/O (Optional)
- Two 10/100/1000BASE-T Ethernet ports
- One USB 2.0 port
- One USB 2.0 port for USB-to-UART
- General-purpose LEDs
Rear Panel I/O
- Three 10/100/1000BASE-T Ethernet ports
- Two USB 2.0 ports
- Two RS-232/422/485 serial ports
- PMC I/O
Software Support
- UEFI firmware
- Wind River VxWorks BSP
- X-ES Enterprise Linux (XEL) BSP
- Linux Yocto BSP
- Contact factory for availability of Microsoft Windows drivers and other operating systems
Physical Characteristics
- Contact factory for details
Environmental Requirements
Contact factory for appropriate board configuration based on environmental requirements
- Supported ruggedization levels (see the X-ES Ruggedization Chart): 1, 5
- Conformal coating available as an ordering option
- Thermal performance will vary based on CPU frequency and application
Power Requirements
- Power will vary based on configuration and usage. Please consult factory.
Accessories
- XIt1025 (90060490) – 6U VME Rear Transition Module with Gigabit Ethernet, Serial, USB, and PCI Express
- XTend230 (90072690) – Debug Module for Programming and Diagnostic Interfaces
XCalibur4730
Intel® Xeon® D-1700 Processor-Based 6U VME Single Board Computer with 48 GB of DDR4 and SecureCOTS™
Connect with a product expert today
Access technical documentation, board support packages, software, and other resources for working with the XCalibur4730. All X-ES products are backed by our four-hour customer support guarantee.
Datasheet
To view all of the information about this product in a PDF, please download the datasheet.
Technical Documentation
SupportNet is your source for hardware manuals, technical support, and software downloads.
