3U VPX SINGLE BOARD COMPUTER  ·  SKU 90075905

XPedite8370

The XPedite8370 is a secure, high-performance, 3U VPX-REDI, single board computer based on the Intel® Core™ Ultra (Series 3) processor (formerly Panther Lake) and aligned to the Sensor Open System Architecture (SOSA) I/O Intensive profile (SLT3-PAY-1F1F2U1TU1T1U1T-14.2.16).

XPedite8370 3U VPX Single Board Computer (SBC)

 

01At a Glance

Form Factor
3U VPX
VITA 46 · VITA 48

Processor
Intel® Core™ Ultra (Series 3)
Code name: Panther Lake

Memory
64 GB LPDDR5 SDRAM
With in-band ECC

SOSA Profile
14.2.16
I/O Intensive Profile

Ruggedization
Level 5
Conduction-cooled

Product Lifecycle

X-ES also offers comprehensive configuration and obsolescence management services, providing customers with direct control over non-interchangeable changes and extending product availability and serviceability well beyond standard end-of-life milestones.

Engineered for Extended Reliability

All X-ES products are designed and manufactured 100% in the USA with components from trusted supply chains in order to deliver rugged, reliable performance in the most demanding environments.

Built with components rated for extreme conditions and validated through rigorous testing, our solutions minimize obsolescence risk and lower total cost of ownership across the full program lifespan.

 

02Core Capabilities

Introduction to XPedite8370

The XPedite8370 is a secure, high-performance, 3U VPX-REDI, single board computer based on the Intel® Core™ Ultra (Series 3) processor (formerly Panther Lake).

It delivers superior performance and efficiency for today’s network information processing and high-performance embedded computing applications.

Ruggedized, Standards-Based Design

Aligned to the Sensor Open System Architecture (SOSA) I/O Intensive profile (SLT3-PAY-1F1F2U1TU1T1U1T-14.2.16), the XPedite8370 is engineered for ruggedized systems that demand high-bandwidth processing alongside low power consumption, combining open-standards interoperability with the durability rugged deployments require.

Security & Data Protection

The XPedite8370 integrates SecureCOTS™ technology with a Microchip PolarFire™ System-on-Chip (SoC) FPGA for hosting custom functions to protect data from being modified or observed and provides an ideal solution when stringent security capabilities are required.

Memory & Storage

The XPedite8370 supports up to 64 GB of LPDDR5 SDRAM with in-band ECC in eight channels and up to 1 TB of onboard NVMe storage, with optional AES-128/256 TCG Opal 2.0 Self-Encrypting Drive (SED) support.

I/O & Connectivity

The XPedite8370 also provides fast and efficient I/O, with one 100GBASE-KR4, up to two 25GBASE-KR, and one 10/100/1000BASE-T Ethernet ports and including USB 2.0, USB 3.2 Gen 1, PCI Express, RS-232 or RS-422/485 serial, and DisplayPort video through the backplane connectors.

Expansion Capabilities & Software Support

The XPedite8370 provides additional expansion capabilities by including an integrated XMC site, which includes a x8 PCI Express connection to the Intel® Core™ Ultra processor and X12d, X16s, and X8d I/O mapped directly to the VPX backplane connectors.

Wind River VxWorks, X-ES Enterprise Linux (XEL), and Linux Yocto Board Support Packages (BSPs) are available.

 

03Block Diagram

 

04Technical Specifications

Processor

  • Supports Intel® Core™ Ultra (Series 3) processors (formerly Panther Lake)

Memory

  • Up to 64 GB of LPDDR5 SDRAM with in-band ECC
  • Up to 1 TB of onboard NVMe storage with optional Self-Encrypting Drive (SED) offering AES-128/256 TCG Opal 2.0 hardware encryption support
  • 64 MB NOR boot flash
  • 64 kB EEPROM

Security and Management

  • Microchip PolarFire™ SoC FPGA with 256 MB SPI NOR flash
  • Designed with SecureCOTS™ technology to support enhanced security and trusted computing
  • System voltage monitor, power-on/reset control, non-volatile write-protection control
  • Trusted Platform Module (TPM) 2.0
  • IPMI Controller (IPMC), supporting Tier 1, Tier 2, and Tier 3 operating modes

VPX (VITA 46) P0 I/O

  • Two IPMB connections to an IPMI Controller

VPX (VITA 46) P1 I/O

  • One 100GBASE-KR4 Ethernet port to P1.A
  • Up to two 25GBASE-KR Ethernet ports (configuration restrictions apply; contact factory for details)
  • One x4 PCI Express Gen4-capable interface (not available on all processor SKUs)
  • One maintenance serial port, software configurable as LVCMOS or RS-232
  • One single-ended FPGA GPIO
  • XMC X12d I/O

VPX (VITA 46) P2 I/O

  • One 10/100/1000BASE-T Ethernet port
  • One USB 2.0 port and one USB 3.2 Gen 1 port
  • Two RS-232 serial ports or one RS-422/485 serial port
  • One DisplayPort HBR2-capable interface
  • Three single-ended FPGA GPIOs
  • XMC X8d I/O
  • XMC X16s I/O

XMC Site

  • One x8 PCI Express Gen4-capable interface

Software Support

  • RDMA over Converged Ethernet (RoCE) v2 internet layer protocol support
  • UEFI firmware
  • Wind River VxWorks BSP
  • X-ES Enterprise Linux (XEL) BSP
  • Linux Yocto BSP
  • Contact factory for availability of Microsoft Windows drivers and other operating systems

Physical Characteristics

  • 3U VPX-REDI conduction- or air-cooled form factor
  • Supports SOSA I/O Intensive profile (SLT3-PAY-1F1F2U1TU1T1U1T-14.2.16)
  • SOSA-aligned to AMPS profile MODA3-16.2.15-1-F2C-(E18)(P4F)(2E15-E3)(N-D1-U2-U1-M3/M4/M5-G1)<XA0> (compatibility with other profiles may be possible, contact factory for options)
  • Dimensions: 100 mm x 160 mm
  • 1.0 in. pitch with Two-Level Maintenance (2LM) support

Environmental Requirements

Contact factory for appropriate board configuration based on environmental requirements

  • Supported ruggedization levels (see the X-ES Ruggedization Chart): 5
  • Conformal coating available as an ordering option
  • Thermal performance will vary based on CPU frequency and application
  • Contact X-ES for air-cooled development options

Power Requirements

  • Power will vary based on configuration and usage. Please consult factory.

Accessories

  • XIt1099 (90040110) – 3U VPX Rear Transition Module with 40 Gigabit and 10 Gigabit Ethernet, USB, Serial, and XIM Site
  • XPand1007 (90075300) – Two-Slot 3U VPX Development Platform for Conduction-Cooled Modules with RTM I/O
  • XPand1203 (90072665) – 3U VPX Development Platform for Up to Eight Conduction-Cooled Modules
  • XPand1205 (90075035) – 3U VPX Development Platform for Up to Eight Conduction-Cooled Modules
  • XTend230 (90072690) – Debug Module for Programming and Diagnostic Interfaces

 

XPedite8370 is also available as a fully customizable, derivative design.

Through our derivative design services, X-ES can modify the standard pinout, I/O, form factor, and other key attributes to meet specific requirements, providing the proven performance of a COTS foundation with the tailored fit of a custom solution.

 

05Request Information

XPedite8370 3U VPX Single Board Computer (SBC)

XPedite8370

Intel® Core™ Ultra Processor (Series 3)-Based 3U VPX-REDI Module with 64 GB of LPDDR5 and Microchip PolarFire™ SoC FPGA

Connect with a product expert today

 

06Documentation & Resources

Access technical documentation, board support packages, software, and other resources for working with the XPedite8370. All X-ES products are backed by our four-hour customer support guarantee.

Datasheet

To view all of the information about this product in a PDF, please download the datasheet.

Download Datasheet

Technical Documentation

SupportNet is your source for hardware manuals, technical support, and software downloads.

Access SupportNet

Intel® Core™ Ultra (Series 3) Overview

Learn more about the Intel® Core™ Ultra (Series 3) family of processors.

Learn More

3U VPX SBCs

View the full selection of 3U VPX Single Board Computers from X-ES.

View All

 

07Related Products

 

Back to Top
Fast, Flexible, and Customer-Focused Embedded Solutions
© 2026 Extreme Engineering Solutions, Inc